What kind of plywood do you use to attach boat seats to metal bench seats in a metal boat? - metal boats for sale
I bought a fishing boat of 16 feet on the metal seats and want to switch it to places with folding seats on each bank
Friday, December 11, 2009
Metal Boats For Sale What Kind Of Plywood Do You Use To Attach Boat Seats To Metal Bench Seats In A Metal Boat?
11 comments:
1 / 2 "to 3 / 4" thickness should be sufficient. Seal with a yacht quality varnish / sealer.
Keep an eye on the wood over time, but ... Action of water, decomposes over time.
I prefer to use the forums table itself. Use space 10 inches for the seat and plannk 2 10 inch pieces for the back. The hardest part is always the ideal material for paper folding
I prefer to use the forums table itself. Use space 10 inches for the seat and plannk 2 10 inch pieces for the back. The hardest part is always the ideal material for paper folding
You need a treatment against green-plated .. because the boat is always a little moisture .. Decomposition of the record for you.
, Falls to another session in conjunction with layers of marine-class, just a thought, and kinda wonder why they were not examined by the manufacturers.
I have in office a long and often rebuilding bathroom was. For the bath or shower, I mean? Composite Backer board, which I think is more waterproof, more durable, or at least through the degradation process.
I have not tested for boat seats, but I need to believe that there are ways to adapt, as you suggest you want to align the plywood. Just a thought ...
Rev. Steven
Another idea just came to mind, why not something like "Trex"? Platform composite type "wood"?
, Falls to another session in conjunction with layers of marine-class, just a thought, and kinda wonder why they were not examined by the manufacturers.
I have in office a long and often rebuilding bathroom was. For the bath or shower, I mean? Composite Backer board, which I think is more waterproof, more durable, or at least through the degradation process.
I have not tested for boat seats, but I need to believe that there are ways to adapt, as you suggest you want to align the plywood. Just a thought ...
Rev. Steven
Another idea just came to mind, why not something like "Trex"? Platform composite type "wood"?
I would be 1 "oppo-plated exterior. They are the elements of the face.
be sure to marine grade
A plate of marine plywood.
Painting with the label ", it will take, and the capacity in wetlands.
What you need to do is Susan receives a "lazy" and the installation of seats at this point, so that you can turn if a "big hook":)
Mount the seat on the hub, then attach the lazy Susan is in the metal cover (if large enough to seat width with stainless steel screws, if the usual rust).
Or, if not the seat is big enough, then lay a basis for plywood (marine class, even with the paint, also press the underside of the seat with the varnish, so they do not get moisture in it, if your wood exposed) in the seat, and check that "above all" the margins, or the production of documents, so that you are not a lip service, because I guarantee you, the d "to the bottom of the legs, and get sore:)
I wish him all the best ..
Jesse
Use 3 / 4 marine plywood B / C unless it is against ordinary plywood to rot quickly a format that the health of breath or just being good.
Plywood 3 / 4 "is what you should use. So the disadvantages of regular use of plywood for the construction of split. The chain and, even if the seal.
Post a Comment